Skip to content

Quick Start: Your First Room

Five minutes, six steps, and you'll have a room with a door in it. It assumes the plugin is installed and enabled.

1. Turn HausTools on

Click the HausTools button in the main toolbar, right of the play controls.

The toolbar and the catalog appear inside the viewport. Click the button again at any point to leave.

2. Draw a plot

Nothing can be built outside a plot — it's the ground your building stands on.

  1. Select the Plot tool ().
  2. Drag a rectangle on the ground. Make it bigger than the building you have in mind. 15 m × 15 m is plenty, and you can go as large as you like.
  3. Release.

A grid appears on the plot. That's what everything snaps to.

3. Draw a room

  1. Select the Room tool ().
  2. Drag a rectangle on the plot. The size reads out as you drag.
  3. Release.

You get four walls, mitred at the corners, and because the walls enclose a space a floor appears on its own. There is no floor tool and nothing else to switch on.

No ceiling? A room only gets one when a storey sits above it; the top storey is capped by its roof.

One drag: four mitred walls and a floor, together.

Prefer to draw wall by wall?

Use the Walls tool () instead: click corner to corner, or drag each run. Draw back to where you started and the loop closes into a room. Same result. See Walls.

4. Put a door in

  1. Select the Openings tool (). There is one tool for both: doors and windows are just different tiles.
  2. In the catalog along the bottom, click a door tile to arm it.

  3. Hover a wall. A ghost of the door previews on it, snapped to the grid.

  4. Click to place it.

Remove one you don't want

Ctrl + click an opening deletes it. A plain click selects it instead, and dragging slides it along the wall.

These doors come from BasePack, the pack that ships with the plugin. Swap in a compatible pack for finished art, or build your own.

5. Paint a wall

  1. Select the Material tool (). The catalog becomes a paint palette.
  2. Click a swatch to arm it.
  3. Click a wall face.

Paint more than one face at a time

Shift + click paints the whole wall run. Shift+Alt + click paints the whole room. The hover highlight shows what a click will cover.

Only the side you clicked is painted. Every wall face is painted separately, so a room can be one colour inside and another outside.

6. Fix a mistake

To do this Do that
Undo anything Ctrl+Z
Delete a wall Hold Ctrl and drag across it
Delete a room Select it with the Edit tool () and choose Delete from its menu. Or hold Shift+Ctrl and drag a rectangle over it, which removes every wall inside
Delete a door Ctrl + click it with the Openings tool ()
Start over The toolbar's Remove plot button (), in the Plots group. It deletes the whole building and asks first, because this one can't be undone

You can find the full list in Hotkeys.


What you just learnt

  • A plot comes first — everything is built on one.
  • Rooms and walls are drawn on the grid; corners mitre themselves.
  • A floor appears on its own when walls enclose a space. Ceilings come with the storey above.
  • Doors and windows are one Openings tool plus a catalog tile.
  • Painting is per wall face, or a whole run or room with a modifier.
  • The pieces come from a pack. BasePack ships with the plugin; swap it for a compatible pack, or build your own.