Changelog¶
All notable changes to HausTools are documented here. Dates use YYYY-MM-DD.
[1.1.2] — 2026-10-30
Added
- Panel fences: A fence style can be built from whole panels instead of a railing (Build Type: Panels). Its panels are laid along each run like wall cladding, in any whole length, longest first, with the style's Pole closing each open end, or at every joint with Pole at Every Joint on, for garden fences and walls. Each panel length can carry random variations, each with its own pivot, rotation and chance. F in the Fence tool, or Flip on a selected fence, turns its panels to face the other side.
- Storey heights from wall styles: A wall style's Heights card sets Storey Height and Ceiling Height. Each storey takes the largest Storey Height among the styles on its walls, per building and per storey, so one building can have a double-height ground floor under normal storeys, and a tall building beside a short one keeps its own heights. Walls, floors, ceilings, stairs and roofs follow.
- Wall thickness from wall styles: A wall style's Thickness card sets Wall Thickness. A wall takes the thicker of its two faces' styles, so an outside wall keeps its thickness under an inside lining. Changing the style updates the walls clad with it, and a wall goes back to the pack's thickness when that style comes off.
- Hide a room: The eye on a selected room's Edit widget builds it empty: no floor, ceiling or inside wall pieces, while its outside walls, its neighbours, the floor above and the roof stay. Click again to show it as it was.
- Ceiling Height Override: The gear on a selected room's Edit widget gives that room its own ceiling height. Pack Default keeps the wall styles' height.
- Clad and paint by dragging: Press on a wall face, drag across the walls you want and release to clad or paint them all as one undo step. Shift takes each face's whole run, Ctrl at the press erases.
- Run end caps: A wall style can close its runs with Run start and Run end caps, placed only where a run of the style stops, never where it carries on. Each cap has its own Pivot and Rotation in its edit mode.
- Windows and doors on corners: On Corners lets a piece take the end cell a 90° corner keeps, so a storefront as wide as the whole wall places from corner to corner.
- Catalog categories: A window or door can carry a Category, such as Storefronts or Exterior Doors. Each category is its own gallery section with its own filter tick box.
- Adaptive attachment placement: Give Way to Corners, Give Way to Openings, Covers Wall Extras and Paired Attachment decide where a window's pillars and other attachments are left out or seated. A Side by side mesh replaces two attachments that touch end to end.
- Rides the Piece on an extra seats it from the opening's own wall piece, so a door leaf without a frame stays in its casing on walls of any thickness.
- Piece materials: The gear on a frame, an extra, a run cap or an attachment offers Materials, to place that piece with materials of its own. Paint on a building still replaces them.
- Procedural Finish on a roof style builds finished procedural roofs when the style has no roof pieces: roofs join cleanly and take paint, with no tile limit.
- The Plot tool sits on the surface under the cursor, such as a landscape, a podium or a roof, so a plot drawn there stands on it, and anything already built on the plot moves with it.
- HausTools remembers your plot: It reopens a level on the plot you were last on, without marking the level as changed.
- Switching plot frames it: The previous and next plot buttons, and removing a plot, move the viewports to fit the plot you land on.
- Materials on a wall piece itself: A wall, corner or foundation piece, and a window or door's wall, can place with materials of its own, as its frame and extras already could: the gear on its mesh under ASSET, in the piece's edit mode, offers Materials. Paint on a building still replaces them.
- The pitch arrow snaps to neighbouring roofs: Dragging a roof's apex arrow catches the pitch of the other pitched roofs on its floor and lights up the roof it matched, so a porch roof beside a hip's end lies in the same plane.
- AI agents through Unreal MCP (experimental, UE 5.8): With Epic's Unreal MCP and All Toolsets plugins on, an AI agent can build and edit HausTools houses: plots, walls, rooms, windows and doors, roofs, decks, fences, stairs, paint and packs, each edit one undo step. The same edits are open to Python scripts and Editor Utility Blueprints through the HT Toolset function libraries, on UE 5.7 too. Projects without Unreal MCP are unaffected.
Changed
- Dollhouse cuts each building at its own floor: Every building on a plot keeps its own 45 cm stub, whatever its storey heights or foundation.
- A wall style has one 45° corner for every 45° bend: Model it mirror-symmetric, both arms the same, so it fits both ends of a chamfer.
- Where a style has no inner corner piece, its wall pieces run on and cross inside the wall instead of leaving the corner open, so one style fits walls of any thickness.
- Ceiling Height moved from the Rooms column to the wall style's Heights card.
- Window and door tiles in the catalog are lit from the side you see them from, show their frames and extras as they are placed, and the Pair with Style menu shows each piece as its own tile does.
- Dropdowns from a floating bar, such as a room's ceiling height or a stair's railing, close only on a click outside them or on picking a value.
- A window or door piece longer than 8 cells claims its full length of wall.
- HausTools opens faster: Only the house you are editing rebuilds when the mode opens. Every other house keeps the build saved with it until you switch to its plot.
Fixed
- Switching the pack in the catalog no longer changes the walls and storeys of buildings clad with another pack.
- The Material tool's Shift and Shift+Alt fills on a foundation work from an upper storey too.
- A pillar or other adaptive attachment wears the paint you give it.
- An attachment no longer stands inside the corner piece of a window or door right beside a corner.
- A window or door placed from one style on a wall clad in its paired style no longer doubles the pieces both carry, such as door leaves.
- A paired extra is left out where no face of the wall wears its partner's style, instead of showing interior pieces on a bare wall.
- A new building's ground storey keeps its floor and ceiling paint from the start.
- On a plot whose buildings have different storey heights, the Roof tool's placement outline, a selected roof's outline and arrows, and the move ghost sit on the roof's own building. They used to float at the tallest building's height. A porch's structural columns under such a roof now reach its real eave too.
- A roof style's pieces and the staircase clads keep the materials their mesh shows in the Content Browser. A mesh whose parts were not in material-slot order wore its materials swapped.
- A pitched roof set lower than its walls' top no longer shows its attic sticking up through the roof along the eaves: the attic floor goes down with the roof.
- A porch roof's siding stays on its own side. Two porch roofs on a wraparound porch no longer stand a tall strip of siding up at the porch corners.
[1.0.1] — 2026-10-15
Changed
- One download per engine. Fab offers separate Unreal Engine 5.7 and 5.8 downloads, each naming its own engine.
- HausTools builds on Unreal Engine 5.8 without warnings, as well as on 5.7.
- Linux is listed alongside Windows, so Fab can build the plugin for both.
- The plugin's README is written for Fab buyers, with the engines, installing from the Fab Library and links to these docs and support.
Removed
- Three unused files: a placeholder texture, its source image and a stair arrow mesh.
[1.0.0] — 2026-10-12
Added
- First release on Fab. This version rolls up all the work since 0.55.0.
- Stair bevels. Handrail, Newel, Baluster, Stringer and Steps Bevel in Project Settings each round off their own part of a staircase, with Width, Segments, Weighted Normals and Rotate Grain. Steps Bevel is on by default and the other four stay off until ticked. A fence without pack pieces takes the handrail, newel and baluster bevels too. An edge where two parts of the staircase body meet stays sharp, so a bevel never opens a gap between a tread and its riser.
- Clad under-stair walls. With the Clad tool on its Walls chip and a wall style armed, a click on a staircase gives its under-stair walls that style's staircase panel and trims, cut to the slope of the flights and around each landing. Ctrl+click clears it back to the plain wall. The clad walls take paint piece by piece and bake as their own part.
- Paint on pack pieces. Pack pieces on a fence, a deck's skirting, a staircase's railing and a roof's gutters take paint from the Material tool. A click paints one piece, Shift+click paints every piece of that kind on the fence, railing or roof, and Shift+Alt+click on a fence reaches that kind on every fence joined to it. Ctrl erases the same way.
- A roof style sets its own thickness. Thickness in the roof style's settings, 20 cm by default, applies to every roof on that style. Soffit Thickness and Bevel Angle are there too, and every control on the card has a tooltip. A roof with no style still uses Default Roof Thickness from Project Settings.
- Hole Inset has Auto. Ticked, a window or door's hole takes the frame's own size. Unticked, the hole tucks behind the frame by Width and Height, in a storey wall as well as a gable. New pieces start on Auto. Pieces in existing packs keep their Width and Height, so their storey-wall holes become that much smaller on each side.
- Pack menu. Packs can be dragged into any order, and a long list scrolls. New Pack and Rename turn into a name field inside the menu. A pack's actions menu gains Duplicate, which copies every style, piece and pose into a new pack, and Show in Content Browser. Duplicate BasePack to start your own pack from it.
- Railing_Staircase in BasePack. A third fence style: the Railing with Bottom Rail off, for a staircase.
- Length axis for fence rails. A rail modelled along Y turns onto its run by itself. Existing packs are updated when they open and their rails sit exactly where they did.
- Ground Z on the plot widget. The plot's floating widget has a field for the height of the plot's ground.
- Rotate keys work on a selection.
,and.turn a selected staircase, plot or room in place, as they already did a roof. - Moving a building shows its roofs and decks. The ghost that follows the cursor carries each roof and deck as well as the walls.
- Card keys in the catalog. A selected card or swatch takes Enter to edit it, Delete to remove it, Escape to deselect it and F to show it in the Content Browser. Escape also closes a piece's edit settings.
- Use Selected on empty tiles. An empty catalog tile shows the Content Browser's Use Selected arrow on hover and adds the meshes or materials selected there.
- Right-click opens the actions menu on list rows as well as on catalog cards: the Styles list, the Bake window's Manage list and the material list.
- Bake: one mesh per room. Each room bakes its own floor mesh and ceiling mesh, each with its own collision. A baked building files each storey's meshes under Storeys > S0, S1 and so on, split into Walls, Floors and Ceilings.
- Bake: shared meshes and Sweep Library. Identical staircases in a building bake to one shared mesh. Sweep Library on the Manage tab merges meshes that are identical across baked buildings into a SharedMeshes folder, deletes library files nothing uses and removes emptied folders. A copy painted differently keeps its paint. The new setting Run Sweep Library cleanup after bake does it after every bake.
- Bake: box collision. Baked collision uses boxes wherever a box fits the shape within the new Collision Box Tolerance setting (8 cm by default), and joins boxes that line up. Hip roofs, gable ends and stair rails keep their convex hulls.
- Bake window additions. A tick menu on the buildings list (All, None, Not baked, Changed, Not baked or changed), a view button and the plot number and floor count on each building, collapsible sections, Lumen cards per mesh and Distance field resolution scale, and Clean old files on re-bake, which deletes the files a re-bake no longer makes.
- Manage tab additions. Show source and Hide source swap a baked copy with the building it came from, and Edit source makes that building's plot the one you are editing.
- Buildings tab additions. Each building has Delete, Retake thumbnail and Flip thumbnail. A thumbnail is now a tight isometric view of that building.
- A green arrow shows a baked building's front while you place a copy, so you can see which way it faces before you turn it.
-
Console.
HausTools.MovePlot <PlotLabel> <DX> <DY>moves a plot's whole building by grid cells, andHausTools.DumpKitlogs every piece in the pack. -
Drop several assets on a "+" tile. Select a few materials or meshes in the Content Browser and drop them on a "+" tile in one go: each becomes its own swatch or piece, in the order they were dragged.
- Move a fascia piece. The fascia's card has Pivot Y (out from the roof edge or back into it) and Pivot Z (up or down), so a fascia modelled with a cap that laps over the roof can be seated.
- Gable wall Length axis and pivot. A gable wall mesh modelled along Y now covers the gable end. Its card has the same Length axis choice the walls have, and Pivot X, Y and Z.
Changed
- The editor says "pack" where it said "kit". A pack asset shows as HausTools Pack in the Content Browser, and a new pack's asset is named HT_<pack name> and saved in Content/HausTools/Packs. Existing pack assets keep their names.
- Hover highlight in the Material and Clad tools. The hover shows the pieces a click will take, in a translucent highlight with a white outline of their outer edge, red under Ctrl. It replaces the box and the rectangle.
- Shift+click covers the whole run of a wall face even where walls meet that wall from its other side. Only a wall meeting the side you click ends the run.
- Material tool picking. It no longer paints through a clad wall. With an upper floor active it paints the walls and rooms of the floors below. Shift+Alt+click through a doorway paints the room you aim at. In Dollhouse the part of a wall the cut hides no longer catches a pick.
- Edit widget. Its secondary windows (railing, stringer boards, under-stair walls, step count, downspout end) are dropdowns hanging from the button that opened them. The widget stays clear of the toolbar and the catalog.
- Catalog edit strip. It is tighter: Length axis sits in the Transform card, the option pickers are dropdowns, and each mesh card folds away with a chevron the catalog remembers.
- Catalog tiles and wording. Square corner tiles read Exterior 90° and Interior 90°. An empty tile shows a + and is named for its category. Fence rails, deck skirts and gutters work like walls, with one Add tile that measures a new mesh into its length. Pieces, swatches, frames and extras say Remove, since the asset stays in your project. A style's corners can no longer share a mesh. The staircase slot is now just Wall.
- Pairing a window or door with another style moved into the card's actions menu, under Pair with style.
- Bake window. Bake and Manage are real tabs, Bake Selected is a solid button, the output folder shows as Content/... and new bakes default to Content/HausTools/BakedBuildings. Every bake setting says on hover what it does.
- Separate actors is now Instance pack pieces. It is on by default and reads the other way round: on pools the pack pieces on one Cladding actor, off gives every piece its own named actor.
- A building's default bake name includes its level, as HT_<Level>_<N>, so plots in different levels no longer share a name and a folder. Buildings already baked keep their names.
- Baked roofs and stairs split into more meshes. Each gable end and shed side bakes its own siding mesh, each connected roof its own fascia, soffit and ridge, each stair one Stairwell mesh, and downspout elbows their own actors.
- Opening HausTools on a level with a plot starts on the Edit tool, not a drawing tool. A fresh level's plot readout says "No Plot" until you draw one.
- BasePack's railing is slimmer (a 4 cm baluster and 8 cm rails), and its meshes carry simple box collision that leaves doors and windows clear.
- A staircase's riser runs down behind the tread below it to that tread's underside.
-
The plain foundation band is no longer built behind a pack's foundation pieces.
-
Painting a roof part paints only the material you click. A fascia's board and its metal cap can take separate swatches, and the hover shows just the part that will be painted. Roofs painted before keep their look.
- A stairwell steps out so the stair's own railing reaches the top when the stairwell has a railing too. The railing round the opening moves with it and meets the stair railing's last post.
- A stairwell in a wall corner leaves out the pack's corner piece where both walls are staircase walls, so no stray skirting or coving floats there.
- A short Half Hip roof has a level eave all round, so its gutter runs round all three sides. The same goes for a Hip roof turned so its ends are steeper than its sides.
Fixed
- A crash when switching to a floor whose stairwell rim board opens over a staircase's arrival.
- A crash when switching Buildings tiles while placing copies of a baked building, and another on the next placement after a re-bake or Delete.
- A duplicated plot gets its own bake identity. Before, baking the copy and the original made them fight over one building.
- Moving a plot keeps the paint on an upper floor that spans several rooms.
- Turning a move ghost with
,and.previews the turn the placement makes. It used to rotate the other way. - A Follow Stairs trim on a high Custom line is cut under the flight where the flight really is, and on a turned staircase it meets the landing's run with a mitre.
- Flicker at a closed stringer's foot and under the top step of a plain under-stair wall. Under-stair walls also run on to a drawn wall within half a cell, so no gap opens between them.
- Baked collision: a mid-flight landing blocks only its slab, a clad roof's collision sits on top of its tiles, an overhang over a lower roof has collision to its edge, gable and shed siding are covered, and an attic window lets you through the attic's end wall.
- A shed roof against a wall bakes as clean a surface, soffit and interior as a free-standing one.
- Identical buildings bake identical meshes wherever they stand, so Sweep Library can share them.
- Re-baking with Hide source buildings after bake off shows a source an earlier bake had hidden.
- Deleting a baked building removes its files and its folder in one go.
- The Buildings tab refreshes after a bake, a delete or a sweep, and building thumbnails are no longer blurry.
- The plot grid no longer paints over the drawing cursor and the facing arrow.
- The Edit widget's hover tooltips show again on stairs, decks, fences and roofs.
- The floor stepper's tooltips and the Remove floor confirmation name the building the buttons really act on.
- Lightmap min resolution is greyed out until Generate lightmap UVs is ticked.
-
A tooltip no longer stays over an open menu.
-
A stair in a room with a dropped floor stands on that floor and still climbs to the floor above, and its placement ghost and Edit handles follow the drop.
- A stairwell's rim board mitres at every corner where the stair's arrival gap cuts it.
- A stairwell hole clears the stair's rail even with no railing drawn round the hole.
- A railing drawn along a stairwell reaches the end of the opening when that end is off the grid.
- A porch railing's structural columns stop at the porch ceiling instead of disappearing into it.
- Window glass no longer hangs in the air as a warped, mirror-like sheet in Dollhouse view.
- No more hairline slit in the roof where a smaller roof's ridge runs into a bigger roof's slope.
- Painting a roof's fascia also paints the boxed-in corners where the eaves meet a gable end.
- The boxes at a roof corner no longer stack copies of a fascia piece taller than the fascia.
- No more slit in a gutter where it leaves an inside corner, or of sky between a porch gable wall and its corner box.
Removed
- Project Settings lose Handrail Profile, Newel Style, Newel Cap Size, Newel Cap Height, Newel Base Height, Baluster Style and Baluster Block Height. The generated railing is plain boxes that a pack's pieces replace, so none of them had any effect.
- Project Settings lose Default Window Width, Default Window Sill and Default Window Head, which nothing used. Default Door Width and Height stay: they size the frameless doorway the Openings tool places with no tile picked.