Plots¶
A plot sets the area one building can occupy. It carries the grid you snap to, and everything you draw belongs to it: walls, rooms, roofs, decks and stairs.
Draw a plot first. The Walls () and Room () tools only work inside one, so a tool that won't draw is usually a missing plot, not a fault. Draw it larger than the building itself: porches, decks and fences sit inside it too.
Drawing a plot¶
- Select the Plot tool (), the first tool in the toolbar's Building tools group.
- Drag a rectangle on the ground. The size reads out as you drag (
30m × 25m). - Release to place it.
The cursor and its grid sit on whatever surface is under them, such as a landscape, a podium or another building's roof, while still snapping to whole cells sideways. Where you press sets the plot's ground height, so a plot drawn on a raised surface stands on it. Over empty space the plot keeps the height it already has.
The plot's grid appears on the ground and stays visible while you work. Step up a storey and it is replaced by a floor grid on each room below, at that storey's height, so the grid always shows where you can actually draw.
Several plots in one level¶
One plot is one building; a level can hold as many as you like. The plot stepper, at the right-hand end of the toolbar across the top of the viewport, moves between them and adds or removes one:
previous ·
Plot 1/1 ·
next ·
add ·
remove
Removing a plot is permanent
Remove plot deletes the whole building standing on it and cannot be undone. The undo history is cleared, so a later Ctrl+Z can't partially resurrect it. The dialog says so, and defaults to No.
Resizing a plot¶
Draw over it again. Select the Plot tool and drag a new rectangle: that redefines the plot you are on rather than adding another one, so a plot can be grown or shrunk whenever you like, as one undo step. Press on a different surface and the plot takes that ground height too, and anything already built on it moves with it.
Nothing needs to be selected first. A redraw changes the active plot, the one
named in the stepper's readout, for example Plot 2/3. With several plots in the level, step
to the one you want to resize before you drag.
Shrinking a plot never deletes anything. The boundary decides where you can draw, not what stands, so walls already outside it stay exactly as they were. To remove them, select them with the Edit tool (), in the toolbar's Building tools group, and press Del.
Selecting a plot¶
With the Edit tool, click the plot's outline or any open ground inside it. The outline turns green and the Edit widget appears with three buttons: rotate left () · move () · rotate right (), with the Ground Z field under them. The plot is what a click finds when it finds nothing else, so a wall, a room floor or a deck takes it first.
Moving and rotating the whole building¶
The Edit widget moves and turns everything on the plot at once: every storey, roof, deck, fence and staircase. One Ctrl+Z puts it all back.
- Rotate left () and rotate right () quarter-turn the building in place.
- Move () shows a translucent ghost of the entire building following your cursor: every storey stacked at its real height, raised structures on their foundations, the roofs and decks along with them, and a green outline of the moved plot. , / . turn the whole ghost before you click to place it.
- Ground Z, the field under the buttons, moves the building up or down: type a height, step it with the arrows, or drag the value. See Matching the plot to your terrain.
The plot outline and its grid travel with the building.
Hotkeys¶
| Input | Action |
|---|---|
| , / . | Turn the selected plot, and everything on it, by 90° |
| Esc | Cancel a move in progress; otherwise deselect |
Full list: Hotkeys.
Matching the plot to your terrain¶
A plot carries its own ground height, so a building can sit at any elevation, not only at world zero. Select the plot with the Edit tool, and the Edit widget shows a Ground Z field under its three buttons. Type a height, step it with the arrows, or drag the value. It is the height of the plot's ground in centimetres, in world units, so it reads against the terrain you are matching.
Drawing the plot on the terrain sets the same height for you. Ground Z is for the fine adjustment, or for a plot drawn over empty space.
Everything on the plot rides it: every storey, the foundations, the grid you draw on and the overlays, so the building keeps its shape and simply sits higher or lower.
Working on one plot at a time¶
Isolate () hides every other building and everything else in the level, leaving the plot you're working on in a still-lit scene. Reach for it once a level holds several plots and the neighbours crowd the view you are working in. See Dollhouse & Isolate.