Skip to content

Roofs & Gutters

A roof style holds a roof's finish: the covering, the boards around its edge and the gutters hung from it. Pick Roof () to see its pieces in the catalog. The form tiles at the left pick the shape of the next roof you place (see Roofs), and the settings at the right are covered in Style settings.

Shot with the Residential Houses – Modular Pack. See Compatible Packs.

Clad pieces

Pieces under CLAD PIECES are tiled and cut to fit each roof. They keep the size you modelled at every pitch, so a steeper roof lays more rows rather than stretching them. Leave a slot empty and HausTools builds that part itself.

A style with no pieces at all, such as a flat shop roof you only want to paint, builds just a rough preview of where the roof goes. Tick Procedural Finish in the style's settings and HausTools builds the finished roof itself instead: the covering, the edge and the underside of the eaves as plain surfaces, joined cleanly where roofs meet. Each part takes paint from the Material tool like a roof with pieces, and since nothing is tiled, even a very large flat roof stays closed.

Tile What it is How to model it
Gable Wall The gable ends, tiled side to side and up, then cut to the roof A panel that tiles
Fascia The board along the roof's edge A board that repeats along its length. Fascia Cut trims its depth
Soffit The underside of the eaves Its detail facing down. Set Soffit Thickness to the piece's own thickness
Ridge The cap along ridges and hips Flat. It folds onto both slopes, so one piece fits every pitch
Surface The roof covering, tiled up the slope from the eave One tile at its real size
Flashing Valleys, and seams against taller walls Flat, with the bend line down the Y centre

Shot with the Residential Houses – Modular Pack. See Compatible Packs.

A clad piece has no pivot to set, only Flip facing, Replace mesh and Remove piece (see Editing a piece). Its facing belongs to the tile, so flipping the fascia leaves the same mesh alone wherever else the pack uses it.

Gutters

Gutters hang from the fascia along level eaves. They are placed whole, so each takes Pivot and Rotation like a wall piece.

Tile What it is How to model it
Gutters The straight run, filed by its length 1, 2 or 3 m long, running along X
Exterior 90°, Interior 90° The elbow at an outside or inside corner
End Cap Closes the start of a run
End Cap (far) Closes the far end Its own mesh, since a mirrored cap renders inside out
Downspout The downpipe Standing up. Copies stack down the wall and the top one bends out to the gutter
Downspout End The kick-out at the foot of the pipe With its origin at the top

PORCH GUTTERS holds a second Downspout and Downspout End for pipes that run down a porch column. Left empty, the ones under GUTTERS are used.

Which end of a gutter drains is set on the placed roof. See Gutters.