Interface Tour¶
HausTools works one tool at a time. Select a tool and everything on screen changes to suit it: the cursor, the catalog at the bottom, and what the viewport lets you grab. There is no giant options window to hunt through.
All of it lives inside the level viewport, a toolbar across the top and the catalog docked along the bottom. HausTools adds no panels or tabs to the rest of the editor, so your layout is exactly as you left it when you switch the mode off.
Toolbar¶
Centred along the top of the viewport, split by thin dividers into five groups.
Building tools¶
| Icon | Tool | What it does |
|---|---|---|
| Plot | Drag out the rectangle your building sits on. Walls and rooms only work inside a plot, so this comes first. | |
| Walls | Draw wall runs, one run per two clicks. | |
| Room | Drag a rectangle and get four mitred walls at once. | |
| Roof | Place and shape roofs over the storey below. | |
| Platform | Drag out a deck or terrace. | |
| Fence | Draw fence and railing runs. | |
| Stairs | Place a staircase and let it cut through the floor above. | |
| Edit | Select anything already built and change it. |
Catalog tools¶
| Icon | Tool | What it does |
|---|---|---|
| Openings | Place windows and doors into walls. | |
| Clad | Paint a cladding style onto walls, fences or decks. | |
| Material | Paint a material swatch onto a surface. | |
| Buildings | Place a copy of a baked building from your library. |
These four are paired with the catalog: selecting one switches the catalog to the matching content, and choosing something in the catalog switches back to its tool.
View and output¶
| Icon | Button | What it does |
|---|---|---|
| Dollhouse | Cuts through walls and roofs so you can see and edit inside. | |
| Isolate | Hides everything in the level except the plot you're working on. Lights, sky, fog and post-process stay, so the scene is still lit, and toggling it off puts back exactly what it hid. | |
| Bake | Opens the Bake window: pick plots, name them, and turn them into placeable buildings. |
Plots and floors¶
The last two groups are steppers with a readout in the middle:
- Plots — previous
plot ·
Plot 1/1· next plot · add a plot · remove the plot. One plot is one building; a level can hold several. - Floors — floor
down ·
Floor 1/2· floor up · add a floor · remove the top floor. Both follow the last structure you drew or selected, so select a room first when a plot holds more than one and you want to be sure which.
The active floor is also the top of what gets built. Step down and the storeys above come off until you step back up. Nothing is lost; they are simply not assembled while you are working below them.
Removing a plot cannot be undone
Remove plot deletes the whole building standing on it. Remove floor deletes everything on the top floor, but that one is undoable. Both ask first.
Edit widget¶
Select something you have already built with the Edit tool () and the Edit widget appears beside it in the viewport, holding everything you can alter about that element. What it offers depends on what you selected.
| Selected | The widget offers |
|---|---|
| Room | Rotate , move , copy , add a floor and delete , plus a floor-drop toggle set apart below them that lowers the floor to the ground for a garage |
| Plot | Rotate and move the whole building. Removing a plot stays on the toolbar |
| Opening | Flip which way it faces , move , copy , delete , and a toggle that removes the foundation under it, so a car can drive through a garage door |
| Stairs | Rotate , move , delete , and its railing , stringer boards , under-stair walls and step count |
| Roof | Rotate , move , delete , and toggles for the overhang and the gutters . Both act on the whole roof assembly, not only the roof you clicked |
| Deck or fence | Move and delete |
| Gutter | One control : which end its downspout hangs from, Auto, Start, End or None |
The widget follows the selection, so its controls are always beside the element they act on.
Sizes and angles are dragged, not typed. A selected roof or deck also grows arrows you pull, and the roof's apex arrow is how you re-pitch it: see Editing a placed roof.
Everything that is not on the widget or an arrow, such as the grid size and the pitch a new roof starts at, lives in Project Settings.
Clad type bar¶
The Clad tool () sits in the toolbar's Catalog tools group. Select it and a small bar drops in under the toolbar: Walls · Fence · Platform. It picks what your next click clads and points the catalog at that kind of style.
The bar slides away again after a few seconds. Move the cursor onto it to keep it up, and each pick restarts the countdown. It also goes the instant another tool takes over.
Catalog¶
The catalog is the dock along the bottom of the viewport. This is where the pack lives: cladding, windows and doors, roof looks, materials, and your baked buildings. The chevron at the right end of its header () rolls it down to a slim bar when you want the viewport back, and the bar's chevron () brings it up again.
Reading left to right:
- the pack dropdown and, under it, the scrolling STYLES list,
- a breadcrumb showing pack › active style,
- a filter icon () beside the gallery's title, which opens a tick-box list for narrowing the tiles down (Walls · Foundation · Staircase on cladding; Windows · Doors on openings). It lights up while anything is filtered out, so a short gallery is never a mystery, and it only appears where there is something to filter: wall cladding and openings,
- the tiles themselves,
- and at the right end of the header, buttons to rename () or delete () the active style.
So the flow is pack → style → tile. There is nothing to switch by hand: whichever tool you pick in the toolbar decides what the catalog shows, so choosing Openings puts that style's windows and doors in front of you and choosing Material turns the dock into your paint palette.
See Catalog & Placement.
Viewport¶
This is where you draw, and underneath it is the standard Unreal Engine viewport. Camera navigation, view modes and the editor's own view controls all work exactly as they always do; HausTools only adds what it draws on top. Expect:
- a grid on the plot you snap to,
- ghost previews of whatever the active tool will create,
- on-screen readouts while you work: a wall's length as you drag it, a
room's or deck's size, for example
3m × 3m, - a green outline around whatever is selected, from a plot down to a single opening.
Dollhouse cutaway¶
Dollhouse () sits in the toolbar's View and output group. Turn it on and it cuts through walls and roofs so you can see inside and work on the active floor. The cut also follows your camera: walls between you and the interior drop to stubs while the far ones stay whole, so orbiting re-cuts the building as you move.
Cladding is cut along with the structure behind it, so a cut wall shows its own brick or plaster and the far slope of a roof keeps its tiles. It follows you when you switch plots, and it is only a view: turn it off and the full building is back. See Dollhouse cutaway.
Saving your work¶
Your building is part of your level, so save the level as usual. HausTools keeps all building state in the building model, so a save round-trips your whole design. There is no separate HausTools file to keep track of.
Editing a pack is the exception: a pack is its own asset, so catalog and pack changes are saved with that asset rather than with the level.
Bake is the other half of that: it turns finished plots into ordinary Unreal assets plus one placeable building each, which is what the Buildings tool then places copies of. See Baking & Buildings.
Everything is undoable
Every edit is transacted, so Ctrl+Z / Ctrl+Y undo and redo your building changes like any other editor action, including catalog and pack edits, and a slider drag counts as one step.