Skip to content

Baking & Buildings

Baking turns a finished plot into ordinary Unreal assets: static meshes, materials and a Level Instance you can place. It is where a building stops depending on the build mode and becomes something you light, package and ship like any other content.

Shot with the Residential Houses – Modular Pack. See Compatible Packs.

What a bake produces

Each building becomes its own mini-level, placed in your map as one Level Instance actor. Move it, rotate it or duplicate it like any actor, pack pieces and all.

Every placed copy updates on re-bake

Copies you place are plain engine Level Instances pointing at the shared mini-level. Re-bake the building and every copy in every map picks up the change. You never re-place anything.

Inside, the geometry is grouped so the asset list stays sane:

  • walls per storey,
  • a floor and a ceiling per room,
  • for each connected roof its structure, attic interior, surface, fascia, soffit and ridge, plus a gable siding mesh for every gable end or shed side,
  • one mesh per placed deck, fence and staircase, plus a stairwell mesh for the panels and trim lining each stairwell.

Collision is built from the building's model rather than its triangles. See Collision for what blocks.

Folders

Everything is saved under the output folder, Content/HausTools/BakedBuildings by default, where each building gets a folder of its own holding its meshes, its mini-level and its thumbnail. The meshes sit in subfolders there: Roofs, Storeys, Stairs, Decks and Fences. Each storey has its own folder (S0, S1 and so on) split into Walls, Floors and Ceilings. The actors inside the mini-level carry the same folders in the Outliner, and the Level Instance itself lands in your map under HausToolsBaked, in a folder named for the building.

Two folders beside the building folders are shared by every building you bake. SharedMaterials holds one Material Instance for each painted swatch that changes a parameter, while a swatch that changes nothing keeps using its own material. SharedMeshes holds meshes that came out the same in different buildings. Sweep Library on the Manage tab moves them there under the same subfolders, and later bakes reuse them, so after a sweep a building's own folder may hold little more than its mini-level. Identical staircases in one building bake as one mesh from the start.

Baking a building

Bake () in the toolbar's View and output group opens the Bake window. It lists every building in the current map and bakes the ones you tick, one at a time, showing progress for each. The whole building is baked, whatever floor you're viewing.

  1. Tick the buildings you want baked. Under each name are its plot number and floor count. The icon at the end of the row is red until the building is baked, green once it is and orange once you change it after baking. The button beside it moves the viewport to that building. Beside the heading, the tick button ticks all, none, or only the buildings not baked, changed, or either, and the refresh button re-reads the map.
  2. Name each building. The name is remembered on the plot, so later re-bakes keep targeting the same assets. Leave it and you get HT_<Level>_1, HT_<Level>_2 and so on, named after the level so plots in different levels never share a folder.
  3. Pick the output folder. Type a path or use the browse button, which opens the content folder tree (right-click inside it to make a new folder). The default is Content/HausTools/BakedBuildings.
  4. Set the bake settings (below).
  5. Press Bake Selected.

You can cancel between buildings, and any building already finished keeps its assets.

Bake settings

Setting What it does
Clean old files on re-bake A re-bake deletes the files it no longer makes, such as the meshes of a staircase you removed
Run Sweep Library cleanup after bake Runs the Manage tab's Sweep Library once the bake finishes
Place in level Places the baked building where its source stands. Off writes only the assets and the Buildings tile, and you place copies from the catalog
Hide source buildings after bake Hides your building once its copy is placed, so the two don't z-fight. The outliner's eye brings it back
Instance pack pieces Pools the pack pieces on one Cladding actor. See below
Nanite meshes Builds the baked meshes as Nanite. Pack meshes keep their own setting
Cast shadows Baked meshes and pack pieces cast shadows
Complex collision fallback A baked mesh collides on its own triangles wherever no simple collision was built. Turn it off if your project adds its own blocking volumes
Collision box tolerance (cm) How far a collision box may sit off the shape it stands in for. Boxes are cheaper than convex hulls, and a shape no box fits this closely keeps its hull. 0 allows exact boxes only
Lumen cards per mesh The most Lumen surface cards a baked mesh can use. Too few leaves large baked meshes dark in Lumen, and 0 turns them off
Distance field resolution scale Distance field detail for baked meshes, which sharpens Lumen on thin walls and boards. Memory use climbs quickly above 1
Generate lightmap UVs For baked or static lighting. Leave it off for dynamic lighting, since it slows every bake
Lightmap min resolution The smallest lightmap a baked mesh gets. Only used with lightmap UVs

Instance pack pieces decides how the baked building is split into actors. On, the pack pieces are pooled into instanced components on one Cladding actor. The level then holds far fewer actors, which is better for performance especially on a large map. Off, every pack piece becomes its own named static-mesh actor with its paint applied, so you can pick and move each one by hand. Either way the actors sit in outliner folders by category (Storeys, Roofs, Cladding, Decks, Fences, Stairs).

The reset button beside the heading puts every setting back to its default, and the chevron beside it collapses the section. The Manage tab's Re-bake uses the settings a building was last baked with. Only Clean old files on re-bake, Run Sweep Library cleanup after bake and Hide source buildings after bake come from here.

Thumbnail

Every baked building gets a tile in the catalog's Buildings tab, which the Buildings tool () opens, and the bake takes the tile's thumbnail for you. To take it again, right-click the tile, or click its gear (), to open its actions menu. Retake thumbnail () keeps the same angle and Flip thumbnail () turns to the opposite side, which later retakes and re-bakes keep. Both need the map the building was baked in, or a copy of it placed in the open one, and are greyed out anywhere else.

Manage tab

The Bake window's other half lists every baked building in the current map. Under each name are its bake date and its state: up to date, stale in orange once you change the source building, or source missing in red once that building is no longer in the map.

Click a row to move the viewport to the placed building. Right-click a row, or click its gear (), to open its actions menu:

  • Show in Content Browser () finds the building's level there.
  • Edit source () shows the source building, selects it and makes it the plot you are editing. The baked copy stands on the same spot, so it hides until the next re-bake.
  • Show source and Hide source () swap between the source building and its baked copy.
  • Re-bake () uses the settings the building was last baked with.
  • Delete () removes the building's files and its actors in this map, after you confirm, and shows the source building again. If another map still uses the building, it asks a second time.

Re-bake, Delete and Sweep Library first end any edit session open inside a baked building's Level Instance, and throw away its unsaved edits.

Sweep Library

Sweep Library (), the red button at the bottom right of the Manage tab, keeps the bake library small. Run it after baking buildings that share parts, such as matching houses along a street. Meshes that came out the same in several buildings merge into one shared mesh that every one of them uses, and files and folders no building uses are deleted. It lists what it will delete before it does, and asks to run again when one pass leaves more to clear.

To sweep after every bake, tick Run Sweep Library cleanup after bake in the bake settings.

Placing copies

Select the Buildings tool (), last of the toolbar's Catalog tools. It opens the catalog's Buildings tab, one tile per baked building. Click a tile and a green arrow follows your cursor on whatever surface is under it, pointing the way the building's front will face. Click to place a copy and keep clicking to place more. , and . turn it 90° and Esc stops placing.

Double-click a tile to find the building in the Content Browser. Right-click it, or click its gear (), to open its actions menu:

  • Show in Content Browser () does the same as the double-click.
  • Retake thumbnail () and Flip thumbnail () are covered under Thumbnail.
  • Delete () removes the building's files and its actors in this map, after you confirm.
Comma and period turn the arrow before each click places a copy.

Full list: Hotkeys.