Doors & Windows¶
Doors and windows go in with one tool. Aim at a wall, click, and HausTools cuts the hole and seats the frame in it.
The wall cuts its own hole, so it is always the right size and closes cleanly around the frame. Clad walls carry their own cut hole, so the opening goes through the finished surface too. The frame itself comes from your pack, so picking a different piece is what changes the way a door or window looks.
Placing an opening¶
- Select the Openings tool (), in the toolbar's Catalog tools group. One tool for both doors and windows.
- Click a tile in the catalog to arm it. A tile is one bundled item: the wall piece, its frame, and any extras that come with it such as glass. A pack can sort its pieces into categories of their own, such as Storefronts or Shutters, after Windows and Doors. Set one with Category under OPTIONS when you edit the piece.
- Hover a wall. A ghost previews the opening, snapped along the wall.
- Click to place. HausTools cuts the hole and drops the frame in.
The hole is cut to fit the piece you picked, and placement snaps to the grid and keeps clear of the corners, so a row of windows lines up.
A piece with On Corners ticked, such as a storefront window, may also take the cell a 90° corner keeps for its corner piece. A storefront as wide as the whole wall then places from corner to corner: that corner gets no corner piece, and the wall it meets runs its own pieces into the corner. 45° corners always keep their cell.
To turn it on, double-click the window or door's tile in the catalog to edit it, and tick On Corners under OPTIONS. See Windows & Doors → Options.
With no tile picked, a click on a wall places a plain doorway with no frame. Its size comes from Project Settings.
The green arrow is the front
The arrow on the ground inside the ghost shows which side the door or window fronts. Press F before you click to flip it, or flip it afterwards with the selected opening's Flip () button.
Roofs take openings too
Openings are not limited to the walls of a room. They also go in gable ends, including a half hip's, and in a shed roof's tall sides. You pick those exactly like a wall, and the opening cuts through the cladding and the wall behind it. See Roofs.
Editing a placed opening¶
Openings are selected with the Openings tool
Stairs, decks, fences and roofs are selected with the Edit tool, but a door or window is not. Switch back to Openings () to select one.
Click a placed door/window to select it. Its Edit widget appears above it:
- Flip () turns the frame (and its bundled extras) to front the other side of the wall. The cut never changes. F does the same while selected.
- Move () picks it up and re-place it on any wall; the preview + arrow follow your cursor, and it keeps its piece, facing and identity. Esc cancels.
- Copy () places a duplicate; the copy stays selected, so you can chain copies along a wall.
- Remove foundation () is a toggle that clears the foundation under the opening, so a car can drive through a garage door. It has no effect on an opening in a roof gable.
- Delete () removes it (Ctrl + click does the same without the menu).
Dragging slides it along its own wall
A selected opening can also be dragged. It slides along its own wall in whole grid steps, stopping at the reserved corner cells and butting against neighbouring openings instead of sliding into them.
Hotkeys¶
| Input | Action |
|---|---|
| F or , / . | Flip the selected opening. With nothing selected, F flips the next one you place |
| Ctrl + click | Delete the opening under the cursor, without selecting it first |
| Del | Delete the selected opening |
| Esc | Cancel a Move or Copy pick-up; otherwise go back to the Edit tool |
Full list: Hotkeys.