Skip to content

Start from the Template

The simplest way to build your own pack is to start from BasePack. Its Blender file holds every BasePack piece at the size and origin HausTools expects. Build your pieces to the same origin and footprint and they place the way BasePack's do.

Duplicate BasePack to make your pack, then replace its meshes one at a time. A piece you have not replaced yet keeps its BasePack blockout.

Where to get the file

HT_BasePack.blend is a separate download on the HausTools FAB listing, under Additional Files. It is not inside the plugin folder.

What is in the file

The file holds 111 pieces in six collections. Each piece has a collection of its own, named for the piece, holding its mesh and its UBX_ collision boxes.

Collection Holds Pieces
Exterior Ext_Walls 3, Ext_Corners 4, Ext_Foundation 7, Ext_Openings 12 26
Interior Int_Walls 3, Int_Corners 4, Int_Skirting 12, Int_Openings 10, Int_Stair 1 30
Garage Garage_Walls 3, Garage_Corners 4, Garage_Openings 5 12
Openings WindowFrames 4, DoorFrames 3, DoorLeaves 2, Glass 4, Steps 1 14
Porch Porch_Fence 3, Porch_Rails 6, Porch_Deck 5 14
Roof Roof_Clad 6, Roof_Gutters 9 15

Each length is a piece of its own, so a wall that comes in 1 m, 2 m and 3 m is three meshes to replace.

Skirting is optional

The skirting boards in Int_Skirting are an example, not a requirement. BasePack bundles them onto its interior walls as extra meshes to show how a wall piece carries one. Making a Style shows how to add your own.

What the file already gets right

Keep these three things from the piece you replace and your exported mesh lands exactly where the original did, with no adjustments in the catalog.

  1. Its origin. Every piece sits where HausTools seats it from, so all 111 overlap at world zero. A wall starts at the origin with its base on the floor and runs along +X. Other pieces differ, such as a fence rail that hangs below its origin, so copy the origin of the piece you replace. Hide the other collections in the Outliner to see one piece at a time.
  2. Its units. The file is in metres, so a wall HausTools reads as 350 cm is 3.5 m here. The export converts it, so model in metres and do not rescale.
  3. Its length and depth. Match them to the piece you replace so yours fills the same space. The shape within them and the height are up to you. The tallest wall in the pack, usually an exterior one, sets where the next floor starts. A room's ceiling sits on top of the walls that face into it. If you set a Structural Wall Height Cm, keep every wall at or below it.

Adjust the origin in HausTools

You can still change a piece's origin afterwards. Double-click its tile in the catalog to open its Edit () settings, where Pivot X / Y / Z moves it and Rotation turns it. See Editing a piece.

The file is saved from Blender 3.4, so it opens in 3.4 and every version after it.

Replacing a piece

Duplicate BasePack once to make your pack. Open the pack menu at the top of the catalog, open BasePack's actions menu from its gear () or with a right-click, and choose Duplicate (). Name the pack and press Enter. The copy starts with every BasePack piece in its slot, so buildings stay clad while you replace them one at a time:

  1. Find it in the Blender file. Hide the other collections in the Outliner so only its collection shows.
  2. Model your replacement in its place, keeping the three things above.
  3. Export to FBX with the settings below. If you rename the mesh, rename its UBX_ boxes to match so Unreal keeps its collision.
  4. Import into Unreal into a folder of your own, so BasePack's meshes stay as they are.
  5. Drop it onto its tile in your pack's catalog. It takes the tile's slot, and every building that uses the piece updates.
The new wall is modelled over the piece it replaces.
Dropped onto its tile, the new wall replaces the old one on the building.

Starting from an empty pack

To start from nothing instead, choose New Pack () at the bottom of the same menu. It holds one empty style and takes its dimensions from the active pack. Fill it the same way, dropping each mesh onto its tile.

Export and import settings

These land the piece 1:1 in centimetres from a file authored in metres. Getting one of them wrong is the usual reason a piece imports a hundred times too large, or with two of its axes swapped.

Where Setting
Blender export Scale 1.0, Apply Unit on, Apply Scalings All Local, Forward Y, Up Z
Unreal import Import Uniform Scale 1.0, Convert Scene off, Force Front XAxis off

A piece imports mirrored on Y, and that is correct. Blender is right-handed and Unreal is left-handed, so the conversion moves the footprint's minimum corner to -Y without changing the shape. HausTools normalises it when it measures the piece.

Do not check the size by re-importing your FBX into Blender

Blender's importer ignores the unit factor and reports metres, which looks like a hundredfold error even when the file is correct. Check in Unreal, where the asset's dimensions are in centimetres.

Not using the template

Nothing obliges you to start here. A pack is a set of meshes that follow the rules, whatever tool made them, and those rules are written out in full on the next page. The template exists because reading a specification is a slower way to learn the same six rules than opening a file that already keeps them.