Windows & Doors¶
A window or door in the catalog is one piece made of several meshes. Double-click its tile to edit them.
Shot with the Residential Houses – Modular Pack. See Compatible Packs.
| Part | What it is | How to model it |
|---|---|---|
| Wall mesh | The wall with the opening in it, under ASSET | With the hole modelled in, the size of the frame |
| Frame | The window or door itself, set into the opening | At the size you want the hole, its longer side along the wall |
| Extra meshes | Handles, sills, bars or grilles that ride the frame, any number | In the frame's space, so each lands where you made it |
| Adaptive attachments | Pieces that merge with the next opening's. See Adaptive attachments |
Edit settings¶
A window or door edits like any other piece (see Editing a piece), with these sections added:
| Section | What it holds |
|---|---|
| ASSET | The wall mesh, and Flip thumbnail for a tile that pictures the back of the window or door |
| PREVIEW | The Frame tile. Click it or drag a mesh onto it to add the frame |
| SOCKETS | A card for the frame and one for each extra mesh, with Pivot X / Y / Z and Rotation. The Mesh tile adds another extra |
| ADAPTIVE ATTACHMENTS | Pieces that merge with the next opening's. See below |
| HOLE INSET | The hole HausTools cuts in the blue template wall and around a gable window. With Auto ticked it takes the frame's own size. Untick it to tuck the hole behind the frame's flange by Width at the sides and Height at the sill and head. A hole that reaches the floor stays open to it |
| OPTIONS | On Corners and Category. See Options |
Extras seat from the frame's pivot and never change the hole. Two buttons on an extra's card, under SOCKETS, change that:
- Paired Attachment () keeps it on every wall face its own style clads, whichever piece of the pair was placed and however the opening is flipped. On a face no style of its own clads, it is left out. On a style with Flip facing, paired extras turn round with its wall pieces, so a storefront's awning and trim can come with the interior partner and still face the street.
- Rides the Piece seats it from the opening's own wall piece on the face it was placed from, as a wall extra rides its wall, instead of from the opening's centre. A door leaf without a frame then stays in its casing on walls of any thickness.
Options¶
OPTIONS sits beside HOLE INSET:
| Setting | What it does |
|---|---|
| On Corners | Lets the piece take the end cell a 90° corner keeps for its corner piece, so a storefront as wide as the wall places from corner to corner. That corner gets no corner piece, and the wall it meets runs its own pieces into the corner. Off by default, and 45° corners always keep their cell |
| Category | The catalog section the piece shows under, with its own filter tick box. Type a new name, such as Storefronts or Exterior Doors, or pick one already in use. Empty puts it under Windows or Doors. Categories only organise the catalog: placement never reads them |
Piece materials¶
A piece can be placed with materials of its own, without touching the mesh asset: door leaves that match the window frames, say. Open the gear () on a frame, an extra mesh, a run cap or an adaptive attachment in its edit mode and choose Materials. A wall, corner or foundation piece, and a window or door's own wall mesh, has the same entry on its mesh's gear under ASSET. A window lists the mesh's material slots as the Details panel does, with a thumbnail, a material picker, Use Selected, Browse and a reset per slot. Pick or drop a material on a slot and it is used wherever the pack places that piece.
Paint on a building still replaces them, and pack specs include them.
A clad wall shows the hole modelled in your wall mesh. On the blue template wall HausTools cuts the hole for you, with its sill and head taken from the frame mesh.
Adaptive attachments¶
An adaptive attachment merges with the next opening's when the two touch. For example two 50 cm pillars on neighbouring windows become one 1 m pillar on the shared edge, instead of two half pillars clashing. Pillars are only one use. Any piece that flanks an opening and should join its neighbour's works the same way, such as a pilaster, a column or a band of corner stones.
Add one with the Attachment tile under ADAPTIVE ATTACHMENTS. To open its own settings, double-click its tile or choose Edit () from its actions menu. Done, or Esc, takes you back to the window or door, and Remove attachment () beside it takes the attachment off. A pillar on each side takes two attachments, so a 4 m window seats one at Pivot X −200 and the other at 200.
| Section | Settings |
|---|---|
| ASSET | Mesh, the piece placed while it stands alone |
| SEAT | Pivot X / Y / Z and Rotation, seated like an extra |
| FOOTPRINT | Size X and Size Y, the area in centimetres that has to touch. You set it instead of HausTools measuring the mesh, so a flared base never merges by accident |
| MERGED | Merged mesh, the one piece that replaces a pair standing on one spot, and Side by side, the one that replaces a pair touching end to end. Each has its own Pivot X / Y / Z and Rotation from the midpoint between the two |
| PLACEMENT | Four tick boxes, all off by default. See Where an attachment goes |
Two attachments merge only when they share the same Merged mesh, and one without a merged mesh never merges. Side by side tells the two cases apart: two pillars of windows 1 m apart stand on one spot and become the merged pillar, while two of windows 2 m apart touch end to end and become the side-by-side one, twice as wide. Left empty, both cases use the merged mesh. Attachment Merge Gap in Project Settings sets how close counts as touching, 10 cm by default.
Where an attachment goes¶
The PLACEMENT section decides where an attachment is left out:
| Tick box | When it is on |
|---|---|
| Give Way to Corners | Left out where it lands on a corner piece, for a corner that stands in for it, such as an L corner pillar. Off, it stands beside the corner piece, as a brick corner needs |
| Give Way to Openings | Left out where it lands on another window or door of its storey, so two windows that butt up have no pillars between them. Windows with wall between keep theirs |
| Covers Wall Extras | Leaves out the wall's extras under it on its own side of the wall, so a capped pillar no longer has the wall's top trim running through it |
| Paired Attachment | Seats it on every face its own style clads, whichever of the pair was placed, as an extra's Paired Attachment does. An interior lining's jambs then come with the storefront window they pair with |
Listing the same mesh twice¶
A style can list the same wall mesh as many times as you like, each with its own frame, extras and attachments. One window mesh can carry two different frames, for example. Each has its own tile and picture, and you place, edit and remove it on its own.
Duplicate () in a window or door's actions menu copies it beside the original. That is the quickest way to make a variant: duplicate it, then change the one thing.
Pairing across styles¶
A wall has two faces, and each can be clad in its own style. A window records only the piece from the style you placed it with, and HausTools picks a piece of the same length for the other face. That guess is not always right. Say your exterior and interior styles each have two 3 m window walls with different openings. HausTools might put the small interior opening behind the large exterior one. Pairing lets you match them, so window 1 outside always meets window 1 inside.
Choose Pair with style () from a window or door's actions menu. It lists the pieces of the same length in your other styles, and you pick one per style. A paired tile shows a small badge in its top right corner.
Shot with the Residential Houses – Modular Pack. See Compatible Packs.